Advantages Of Rubber Sealing Test Plugs

  • Standard Construction Types EP8 EP8EX EP15 EP15EX.
  • Body, cap and retaining ring: Brass.
  • Cap seal: Neoprene Rubber.
  • Retaining strap: Ethylene Propylene Rubber.
  • Core: Ethylene Propylene Rubber.
  • Max. Pressure: 35 BAR, 500 PSI.
  • Temp range: -8°C (18°F) up to +135°C (275°F).
  • Suitable for low temperature hot water, chilled water and low temperature steam. (Not suitable for oil or other hydro-carbon fluids). See Neoprene below.
  • "NEOPRENE CORE" Types N8 and N8 EX, N15 and N15 EX. Suitable for some oils and gases.
  • Other cores available for various chemicals.
  • Max. Pressure: 35 BAR, 500 PSI.
  • Temp range: -18°C (0°F) up to +93ºC(200ºF).
  • Stainless Steel plug models are EP8SS, N8SS, EP8EXSS, N8EXSS, EP15SS, N15SS, EP15EXSS & N15EXSS.

Binder Test Plugs

1st column : 15mm (1/2") BSPT Test Plugs in Brass and 316 Stainless Steel. Types EP15 and EP15SS

 (EP15 and EP15SS overall length including cap 41mm)

2nd column : 8mm (1/4")BSPT Test Plugs in Brass and 316 Stainless Steel. Types EP8 and EP8SS

(EP8 and EP8SS overall length including cap 38mm)

Larger plugs: Extended 15mm (1/2") BSPT and 8mm (1/4") BSPT in Brass and 316 Stainless Steel.
(With an extra 38mm (1 1/2") in length for insulation)
(Eliminates extra piece and additional fitting time).
Types EP15EX, EP15EXSS, EP8EX and EP8EXSS

Maximum probe diameter of 4mm can be used with our Binder Test Plugs

Binder Test Plugs Cap Straps can also be supplied in RED and BLUE to comply with BS7350 1990 for unidirectional flow measuring devices (valves).

Description

Product code

1/4" BSPT (8mm) overall length including cap 45mm

EP8-B-7

1/4" BSPT (8mm) overall length including cap 45mm

EP8-R-7

1/4" BSPT (8mm) overall length including cap 45mm, comes with black strap

EP8-7

N.B. If using our binder test plugs on heating or chilled water systems, please check our safety page.

Binder Test Plugs made to order in quantity

Description

Product code

1/2" BSPT (15mm) Chrome Plated Test Plug

EP15EXCP

1/2” BSPT (15mm) Polished Brass Test Plug

EP15EXPB

1/2” BSPT (15mm) Nickel Plated Test Plug

EP15EXNP

1/2” BSPT (15mm) Brass extra length Test Plug + 15mm extra

EP15EX15

Other types and sizes can be supplied.

Description

Product code

1/2" BSPT (15mm) Mild Steel extra length Test Plug

EP15EXMS15

1/4” BSPT (8mm) Brass extra length Test Plug

EP8EX20

316 Stainless Steel Test Plug (ID 10.5mm) for welding to pipe

SSTPWT

1/2” BSPT Brass Special Valve Test Plug

BSVTP

Other types and sizes can be supplied.

The above are just a few of the specials we have made. Please ask us to quote for your requirements.

Specifications may be changed without notice.
‘Neoprene’ is a registered trade name of Dupont Limited.

Please follow this link for a typical pipework schematic

We accept payment by VISA, Switch, Delta, Electron and MasterCard

© 2009 Test Plugs Ltd 12 Falklands Road, Boyton Hall Estate, Haverhill, Suffolk, CB9 0EA, United Kingdom Tel: +44 (0)1440 704201/763167 Fax: +44 (0)1440 763121.