The Comdronic manometer
is a portable pressure indicator which is designed for the measurement of
single or differential pressures up to 1 BAR with an accuracy +/- 0.25% of
full scale reading.
With 1 BAR differential
the gauge will withstand line pressures up to 10 BAR. Readings can be switched
to BAR, MBAR, PSI, or INS H²O or KPA, MM H²O, PSI or MBAR. The instrument
is provided with a carrying case, retractable tubing and a selection of adaptors.
water systems: A light, compact instrument for heating and ventilating commissioning.
The manometer provides quick, and accurate measurement of differential pressure
across regulating valves and orifice plates.
- Indication of filter
condition: In the differential mode, the instrument will indicate a pressure
drop across a filter.
- Flow Indicator: The manometer
is a useful instrument for indicating differential pressure across venturis,
orifice plates, pitot tubes etc.
- Instrument calibration:
On site calibration of pressure or differential pressure instruments whose
accuracy is less than +/- 0.25% FSD.
- Digital indication: Clear
3 1/2 digit LCD 1/2" display eliminates reading errors and incorporates
a battery condition indicator.
- Portable: Complete with
a compact carrying case the manometer weighs 3 1/2 lbs. and overcomes many
of the problems associated with traditional manometers.
- Overload pressures
Maximum line pressure, high side, 10 BAR. Maximum line pressure, low side,
9 BAR. With not more than 1 BAR differential.
- Accuracy +/-
0.25% of recommended operating range at 20°C.
- Temperature range
Pressure media temperature -5º + 60ºC. Ambient operating temperature
0º + 40ºC. Storage temperature -20º + 80ºC.
- Materials in contact
with pressure medium Stainless steel, brass, nylon, urethane, gel silicon,
nitrile and aluminium.
- Display 3
1/2 digit 1/2" high liquid crystal.
- Controls On/off
switch. Pressure unit selector switch. Zero reset knob at rear of case. Flushing
valve for use with liquids. Averaging switch to dampen the effect of pressure
pulsation on the display.
- Power Supply
2 x 9v DC batteries.
- External power supply
A battery eliminator
can be supplied as an optional extra.
- Tubing 2
x 3m transparent tubes marked red and black.
- Adaptors Selfseal,
Twinlok, and Mechseal test plug adaptors are included. Other adaptors to order.
- Dimensions Instrument
with carrying case and accessories: 155 W x 85 H x 355 D mm. Instrument only
144 W x 72 H x 165 D mm.
- Weight Instrument
with carrying case: 1.6 kg 3 1/2 lbs.
information on the differential manometers, please visit www.comdronic.co.uk
payment by VISA, Switch, Delta, Electron and MasterCard
2009 Test Plugs Ltd 12 Falklands Road, Boyton Hall Estate, Haverhill, Suffolk,
CB9 0EA, United Kingdom Tel: +44 (0)1440 704201/763167 Fax: +44 (0)1440 763121.